★★★★★
Precise progressive die stamping
Stamped stainless brackets were burr-free and dimensionally consistent across 10k units.
D
David KimManufacturing Engineer, Seoul Electronics
ISO 9001 certified
Free DFM review
NDA on request
Sheet Metal Stamping Parts | Custom Fabrication & Assembly
Laser cut, bend, stamp & weld — ±0.05 mm fabrication
Tolerance±0.05 mm
Thickness0.5–6 mm
Lead time1–3 weeks
MOQ1 piece
Price$0.10–20
MOQ500 pcs
Lead time2-4 weeks
Upload your CAD for instant pricing · We respond within 24 hours · No obligation
Overview
Mechpart provides progressive-die and transfer-die stamping solutions for sheet metal components ranging from simple brackets to complex multi-bend enclosures. Our press capacity spans 1 ton to 400 tons, processing cold-rolled steel, stainless steel (301/304/316), aluminum (5052/6061), copper, and pre-plated materials in thicknesses from 0.5mm to 6mm. Each stamping line is supported by in-house wire-EDM tooling, CMM first-article inspection, and automated vision sorting for zero-defect deliveries on safety-critical parts.
Typical applications include automotive body-in-white brackets and reinforcement plates, electrical enclosure chassis and busbar connectors, HVAC duct flanges and mounting frames, consumer appliance structural panels, and solar-energy mounting hardware. We excel at rapid tooling for new-product introduction (NPI) programs, delivering prototype stampings in as little as two weeks before transitioning to hardened production tooling for volumes exceeding one million strokes per year.
What makes Mechpart a preferred stamping partner? Our tooling engineers review every part drawing for manufacturability before cutting steel—catching burr-direction issues, springback compensation needs, and strip-layout inefficiencies that inflate your per-piece cost. Combined with an in-house secondary-operations cell (tapping, welding, riveting, assembly), we deliver finished subassemblies, not just blanks. Standard lead time is 2–4 weeks with MOQs from 500 pieces; contact us for full-service stamping that treats your budget as carefully as your tolerances.
Typical applications include automotive body-in-white brackets and reinforcement plates, electrical enclosure chassis and busbar connectors, HVAC duct flanges and mounting frames, consumer appliance structural panels, and solar-energy mounting hardware. We excel at rapid tooling for new-product introduction (NPI) programs, delivering prototype stampings in as little as two weeks before transitioning to hardened production tooling for volumes exceeding one million strokes per year.
What makes Mechpart a preferred stamping partner? Our tooling engineers review every part drawing for manufacturability before cutting steel—catching burr-direction issues, springback compensation needs, and strip-layout inefficiencies that inflate your per-piece cost. Combined with an in-house secondary-operations cell (tapping, welding, riveting, assembly), we deliver finished subassemblies, not just blanks. Standard lead time is 2–4 weeks with MOQs from 500 pieces; contact us for full-service stamping that treats your budget as carefully as your tolerances.
Technical specifications
| Processes | Fiber laser cutting, CNC bending, progressive-die stamping, welding |
| Sheet thickness | 0.5–6 mm (steel) / 0.5–4 mm (aluminium) |
| Bend tolerance | ±0.5° angle, ±0.05 mm linear |
| Max sheet size | 3000 × 1500 mm |
| Welding | MIG, TIG, spot, robotic — full penetration available |
| Materials | CRS, stainless 301/304/316, aluminium 5052/6061, copper |
| Joining | Tapping, riveting, PEM hardware, assembly & kitting |
| Volume | 1–500,000 pcs |
Process capabilities
Fiber laser cutting
Clean, burr-free edges and tight nesting for material efficiency.
Progressive-die stamping
High-volume parts at low piece cost with consistent quality.
CNC press-brake bending
Repeatable complex forms with in-process angle verification.
Weld & assembly
Robotic and manual welding plus full sub-assembly and finishing.
Materials & finishes
Materials
All materials & properties →Surface finishes
Powder coat (all colors)Wet paintZinc platingAnodizeBrushed / grainedSilk-screen / laser mark
Quality & certifications
- Incoming — material certification & spectrometer verification on every lot.
- In-process — dimensional checks at each operation with calibrated instruments.
- First article — full CMM report, FAIR / PPAP available on request.
- Final — visual, dimensional & surface-finish inspection with documentation.
ISO 9001:2015IATF 16949AS9100DISO 14001ISO 13485
Typical applications
Enclosures & cabinets
Electrical, telecom and industrial enclosures.
Brackets & frames
Mounting hardware and structural sub-frames.
Appliance & HVAC
Panels, ducting and chassis components.
Machinery guards
Safety guards, covers and housings.
Frequently asked
What thickness range can you handle?
0.5–6 mm in steel and 0.5–4 mm in aluminium, with laser cutting and CNC bending.
Can you powder-coat in our brand color?
Yes — any RAL/Pantone color, plus silk-screen and laser marking.
Do you do welded assemblies?
Yes — MIG/TIG/spot and robotic welding with full sub-assembly and hardware insertion.
How do you control bend accuracy?
In-process angle measurement on CNC press brakes holds ±0.5° repeatably.
Customer reviews (2)
4.5/ 5 · 2 verified
★★★★☆
Good stamping partner
Quality was excellent. Tooling lead time was slightly longer but worth it for the consistency.
F
Fatima Al-SayedProcurement, Dubai Fabrication
Write a review
Ready to quote Sheet Metal Stamping Parts | Custom Fabrication & Assembly?
Upload your drawing — detailed pricing & free DFM feedback within 24 hours.